RESOURCES

Installation Guide

Two small Tive trackers installed inside your trailer in under 20 minutes. Watch Kenny Lund show you how it's done.

15-20 minutes
Basic tools only

Installation Videos

Walk and Talk with Kenny

A quick intro from Kenny explaining what Guardian Visibility is all about and what you're about to see.

What's in the Kit?

Kenny does a quick unboxing to show you everything included in your Guardian Visibility installation kit.

Full Installation

Watch as Kenny shows how fast and easy the Guardian Visibility kit is installed. As Kenny always says—"If I can do this..."

Installation Overview

Two devices work together to give you complete visibility. Here's how they're installed.

1

Solo 5G Tracker

Primary device - Front wall installation

The Tive Solo 5G is about the size of an iPhone and provides location, temperature, light (door), and shock sensing. It's powered by a rechargeable NiMH battery (non-lithium).

Installation Location

Install on the front wall, roughly 3 feet off the deck, next to the reefer head where forklifts are unlikely to hit it.

A wire harness connects from the Solo 5G, secured across the front wall, down through one of the front drain holes, and up to the reefer battery. Special adhesive clips hold the wiring securely in place.

The harness includes a small module (about the size of a quarter) that converts 12V to 5V and monitors reefer battery voltage. This tops off the internal battery, which gives you around 30 days of backup power without external connection.

2

Tive Beacon

Secondary temperature sensor - Rear door installation

The Tive Beacon is a small battery-powered device that fits in the palm of your hand. It provides a second temperature reading at the rear of the trailer.

Installation

Simply peel the cover off the adhesive and stick it above the rear doors. It links up automatically to the Solo 5G via Bluetooth.

The Beacon has a 2-year battery. We monitor battery levels and automatically send you a replacement when it starts to run low—don't worry, we'll handle it.

After Installation

Once your kit is installed, register your trailer to activate visibility on your private portal.

Register Your Trailer

Download the Quick Start Guide

Print-friendly PDF with step-by-step instructions you can take to the trailer.